AS电玩

Products

Products

Products

Your Current Position:Home > Products > RF Conducted disturbance immunity testing system > Detailed product

RF Conducted disturbance immunity testing system

Briefly describe:

The CRF61006A RF conducted immunity test system is an integrated conducted sensitivity test system based on the IEC61000-4-6 standard. It complies with GB T 17626.6/Automotive Electronics BCI/National Military Standard CS114.

Print the current page

Free consultation:021-51877625

Send email to us:liuliang@7886668.com

Share to:

Frequency range 150kHz-230MHz, frequency resolution 1Hz

Integrated design, built-in: signal generator, RF power amplifier, function signal generator, directional coupler,

RF power meter. Each device can be used independently.

Computer control, automatic calibration and testing, output power monitoring during testing.

All indicators are in full compliance with IEC 61000-4-6, ISO 11452-4, GJB152A-CS114 and other standards.

It is convenient for users to test during the development process to ensure that the frequency and level of product problems can be accurately found.

Internal modulation: AM: 1Hz-100kHz, 0-100%; PM: 1Hz-l00kHz, 10-90% duty cycle.

Complete coupling and decoupling network [CDN] and other accessories, support high current injection method and direct injection method test, optional

Current monitoring probe supports closed loop test method.

    Tech Parameters

Amplifier power

80W

Output impedance

50Ω

Voltage standing wave ratio

≤1.2

             Signal source

Frequency

9k-1GHzCan up to 3GHz

   Output level

-60-10dBm

Unmodulated signal

Continuous wave

Frequency resolution

0.23Hz

Frequency temperature stability

±0.5ppm

harmonic

≤-30dBc

Non-harmonic

≤-50dBc

Output power range

-120dBm~0dBm 9kHz~500kHz; -120dBm~+10dBm500kHz~3GHz

Power accuracy

±1.0dB

Resolution

0.1dB

Internal modulation sourceLF

Sine wave 0.1Hz~500kHz;Square wave  0.1Hz~20kHz;Triangle wave/Sawtooth wave0.1Hz~100kHz

AM

 0~100;

(FM)

1Hz~25KHz

Phase modulation(ФM)

0°~360°;

Duty cycle

1-100%

Output Interface

N

                Power amplifier

Output frequency

150kHz-230MHz

Maximum output power

+44dBm/80W

harmonic

15dBc

Gain

51dB±1 dB (100W)

VSWR

<1.5:1

Output impedance

50Ω

Output Interface

N

                   Power meter (built-in three channels)

Input frequency

9kHz-3GHz

Test level

-40 dBm~+30dBm; Voltmeter:-40 dBm~+30dBm

Precision

±0. 5dB

input interface

N

VSWR

<1.1:1

                   150k-230MHz CDN Coupling/Decoulpling Network

Power cable

M1,M2,M2,M3,M2+M3,M4,M5:

Meet single-phase/three-phase power requirements, maximum current  16A/32A

Unshielded balanced line

T2,T4,T8

Unshielded unbalanced wire

AF2,AF4,AF8

Series shielded cable

S1,S1/75,S2,S4,S9,S25

Others

RJ11,RJ11S,RJ45,RJ45S,USB-C,USB-P

                      Optional accessories for current injection clamp

Electromagnetic injection clamp

Frequency 10kHz1GHz,Coupling factor  < 3 dB150 kHz - 500 MHz),the inside diameter of     23mm/32mm

                    Overall system configuration

Software

Support  Windows XP, Windows 7,with PRIMA software

Control interface

USB

Output Interface

N

 

Data title amount of downloads operation

AS电玩